|
Power Save:
SAVE
UP TO 25% ON YOUR
COMMERCIAL / INDUSTRIAL ELECTRIC BILLS!
The
Power-Save 3400 & Power-Save 3200
Reduce the Amount of Inductive Load in Commercial and Industrial
Environments
The Many
Benefits of the Power-Save 3400 & Power-Save 3200 Include:
-->
Lowers electric bills
up to 25%!
-->
Reduces electricity
required by inductive loads (motors)!
-->
Enhances capacity of
existing electrical system!
-->
Eliminates harmful power surges!
-->
Protects appliances and sensitive electronic equipment!
-->
Reduces harmful
effects caused by electrical noise!
-->
Power Factor
Optimization!
Power-Save 1200�
Featured on Baltimore Radio!
Maryland has been one of
the hardest hit areas in the nation with regard to electricity rate
increases. Two of Baltimore's premier radio stations recently featured
Bob Kleebauer to discuss how the Power-Save 1200 is helping thousands of
Americans save money on their electric bills.
The Power-Save�
is a small gray box that fits neatly next to your breaker panel, saves
you money year after year and protects the entire home.
The Power-Save� was designed with the homeowner & business owner
in mind, providing lower energy bills, increased motor and appliance
life, for all of the equipment inside of your home or business.
Residential customers throughout North America could see a realized savings
of 8% - 10% typically and as much as 25% on their electrical usage (and
thus power bills). The Power-Save� is UL Certified as the Cat. No.
ABET 2201 and CSA certified.
Money isn't all that you
are saving when you use Power-Save Energy Corp. products. It's an energy-wise
purchasing decision with many positive environmental implications.
Power Suppliers also
benefit by being able to supply power to more customers without the
generation or acquisition of additional power.
Power-Save 1200�
Frequently Asked Questions:
How Does the Power-Save Unit Work?
The Power-Save reduces the amount of power drawn from the utility by
storing (in its capacitors) otherwise lost electricity (watts) caused by
the inductive motors in your home. (Some examples of inductive motors
are Air Conditioning units, refrigerators, freezers, washers, dryers,
dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans
etc.) The technology applied by the Power-Save 1200� Unit supplies
that stored electricity back to your inductive loads, thus causing you
to decrease your demand from the utility. If you decrease your demand
from the utility, your meter slows down, and you use less electricity.
The thought is, you�ve already paid for that electricity, why pay for
it and waste it when you can pay for it, store it, and reuse it again.
This whole process is called power factor optimization.
What is Power Factor?
Power factor is the percentage of electricity that�s delivered to your
house and used effectively, compared to what is wasted. For example, a
1.0 power factor means that all the electricity that�s being delivered
to your home is being used effectively for its purpose. However, most
homes in America today have a .77 power factor or less. This means that
77% of the electricity that is coming thru your meter at your home or
business is being used effectively; the other 23% is being wasted by
your inductive load. With a low power factor, the utility has to deliver
more electricity to do the same work. However, the Power-Save unit
increases that power factor in most cases to .97 or .98, thus increasing
the effective use of your electricity and lowering your usage.
Does the Power-Save 1200� work in any home?
Yes it does, as long as you have a circuit breaker panel with breaker
switches and not the old screw in type fuses, the unit will work on any
single-phase electric application for homes. If you say "yes"
to only two or more of the following then you could be saving a
significant amount of money on your electric bill right now!
Is your home over 2500
Square feet?
Is your central air conditioner / heat pump unit 3 years or older?
Is your forced air furnace 3 years or older?
Do you have a pool?
Do you have a well?
Do you use an air conditioner?
Is your refrigerator / freezer not Energy Star rated?
Do you have more than one refrigerator / freezer?
Is your washer / dryer not Energy Star rated?
Do you have a hot tub or a Jacuzzi?
Is your dishwasher not Energy Star rated?
Do you have a number of appliances in your home?
Do you have a 3-phase
Power-Save for commercial and industrial applications?
Yes!
Will the Power-Save
affect any of my appliances and their normal use?
No, if anything, your motors will run about 10% cooler, which is good
for a motor because heat is the enemy of a motor.
How much can I expect
to save per month by using the Power-Save?
That depends on many factors. The size of your home, the amount of
inductive motor load, and the amount you are paying per kilowatt-hour
for electricity etc. However, generally speaking users of the product
have seen up to 25% in reduced consumption, but the average savings is
somewhere in the 15% to 20% range.
How long will it take for the Power-Save to pay for itself?
Generally about 6-12 months, but again, the same factors above apply,
some will see sooner (6 months), some will see later (12 months).
Is the Power-Save easy to install?
We recommend installation by an electrician. The unit comes with
complete installation instructions. It installs in about 20-30 minutes.
How long will the Power-Save last?
It has a predicted lifespan of up to 20 years.
Why haven�t I heard of these products until now?
That�s easy; two words �cost effectiveness�. Up until recently,
electric rates throughout America were cheap, costing us 2, 3 or 4 cents
per kilowatt-hour. Now, electric rates are 8, 10, 12, 14, and 19 and in
some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents
per Kwh. At the cheaper rates the Power-Save didn�t make sense, but at
the current rates, it makes all the sense in the world.
What About Power-Save for Surge Protection?
The Power-Save also protects the entire home against power surges. No
longer a need for so many surge protectors in the home. The Power-Save
1200 provides a broad range of protection for hardwired appliances and
most home electronics such as televisions, satellite equipment,
entertainment systems, etc. The unit protects from power line surges as
well as spikes caused by internal wiring problems, loose connections and
fluctuating demand from large motors such as appliances, vacuum
cleaners, heating and cooling equipment, etc.
Is the Power-Save 1200� Unit Warranted?
Is there a �Money Back Guarantee�?
Yes, 5 year Manufacturers Warranty for full replacement.
Yes, 60-day money back guarantee. If in 60 days, you don�t see
reduction in usage on your electric bill, call us and let us know, and
we�ll give you details on how to return the unit for a full refund of
the purchase price. Installation cost will not be refunded.
The
following is an important statement made by Baltimore Gas &
Electric on their website concerning Power Factor:
�Power
factor measures how effectively your operation uses electrical power.
Poor power factor means your facility is using and paying for more
electricity than it needs while doing the same amount of work. The net
result is higher demand charges on your electric bill and overtaxing
your internal wires and transformers.�
You
can�t afford not to install a Power�Save today!
The
Power-Save 1200 - $299.95
The Power-Save 3200 - $650.00
The Power-Save 3400 - $850.00
Power-Save
3400 Shows Incredible Results in Commercial Application!
"I have
a Power-Save 3400 commercial / industrial unit installed in my 28,000
square foot, 4-story office building. The building is home to a number
of different professional offices including attorneys, engineers and the
United States military. I am seeing an average savings of at least
28% per month and I am very happy with the product. Extremely happy
actually. As an example, prior to the installation of the Power-Save ,
my April 2006 electric bill was just over $2700.00. I just received my
April 2007 bill in the amount of $1780.00. The product will literally
pay for itself in only a few months."
- Mo Sandiq,
Owner of Northwest Investment Properties LLC, Woodland, California
Power-Save
1200 & Power-Save 3400 Installed at Chevron Service Stations.
The Power-Save 3400 and
Power-Save 1200 have been installed at a number of Chevron gas stations
in the Central Coast California area. Chris Frye at Alternative Energy
Inc. handled the installation for Valley Pacific Petroleum, the gas
stations' owner.
Prior to the Power-Save installation, the service stations were spending
in excess of $3000 per month powering the car wash, coolers,
compressors, pumps, fans, signage, lighting and more.
|
